Select the appropriate guide bars and chains
Logosol’s tried and tested premium chains and guide bars.
The right bar & chain – for a great sawing experience! Since its inception in 1989, Logosol has been sawing wood with chainsaws. We have selected three different types of guide bars for different needs. They have different characteristics to suit the varying needs of our customers, from single-log sawing to high-productivity sawing. The proper cutting equipment is important for a great sawing experience. We make it easy for you to make the right choice.
Tip! This text describes the cutting equipment for the sawing units we sell. In addition to this, we also offer cutting equipment for other chainsaw brands.
This is why you should buy cutting equipment from us:
Specially designed for superior sawing: Our guide bars are designed to fit 3/8 pitch picco chains, which are excellent for rip sawing.
High productivity and precision: Selected for demanding sawing with high-performance requirements.
Tests and experience: Our swords and chains are rigorously tested by us at Logosol and thousands of satisfied customers worldwide.
Sharpen easily: We also offer high-quality grinding machines for easy and convenient maintenance.
In short, when you choose Logosol cutting equipment, you get products that are designed to exceed your expectations and help you achieve the best cutting results on your chainsaw mill.
Enjoy a great sawing experience and a perfect result with cutting equipment selected by Logosol!
These are the three guide bars we sell to our chainsaw mills:
- Guide Bar Premium – A fantastic, fine, solid guide bar for log sawing. Thinner material combined with strong hardening and precise tolerances in the guide bar groove produces a bar that is ideal for chainsaw mills.
Recommended! - Guide Bar Solid – Laser cut solid sword with high quality. Moulded groove for the chain. Stable and wide fastening with strong hardening. Without top pulley.
- Guide Bar Standard – A simple sword bar made with three composite plates. Lightweight but slightly softer than a solid guide bar. We used to use this guide bar, but nowadays, we almost always choose Premium or Solid.
Premium
Guide Bar Premium (Cannon)
Our Premium Guide Bar is a bar we highly recommend. We have sold thousands of bars of this model and have heard basically only positive reactions. This is the guide bar we use ourselves. The result is fantastic; it cuts smoothly and requires little maintenance.
It is made out of one piece, combined with really strong hardening and precise tolerances in the bar groove, it is a guide bar that is ideal for chainsaw mills. Experience higher precision, faster cuts, and longer durability!
-
Specially designed for superior sawing, this bar’s incredible quality and precision allow the chain to run straight in the bar groove, improving both the speed of sawing and the result of the sawn timber.
-
Operating life: Extra long operating life. The guide blade’s strong hardening and characteristics give it extra longevity, and it is recommended for demanding sawing.
-
Care: Minimal care. Durable guide bar with rust-proof surface. The guide bar groove has a precision within .002 inches for precisely straight cuts. It provides even wear on the bar and superior durability. Large lubrication holes increase lubrication for longer bar and chain life and reduce the risk of clogging.
-
Characteristics: Made of hardened cold-rolled heat-treated and surface-protected steel. This provides the best possible properties for wear resistance, strength and durability.
The hardening of the bar is deep and it can be sharpened several times. We recommend that you get into the habit of checking the bar when changing the chain. You can read more in the handbook “The Handbook for Your Guide Bar & Chain,” which is available for free download on our website.
| Supply: | |
|---|---|
| Guide bar Premium is available in the following lengths for Stihl MS362/ MS391/MS660/MS661 & Logosol electric saws ES5 and ES8: | |
| Guide bar Premium 50 cm/20” | 3010-025-0050 |
| Ripping chain suitable for | 3614-000-0072 |
| Guide bar Premium 71 cm/28” | 3010-028-0071 |
| Ripping chain suitable for | 3614-000-0092 |
| And to Logosol’s older electric saw Speed Saw E5/E8: | |
| Guide bar Premium 50 cm/20” | 3010-010-0050 |
| Ripping chain suitable for | 3614-000-0084 |
| Sågsvärd Premium 70 cm/28” | 3010-010-0050 |
| Ripping chain suitable for | 3614-000-0104 |
Solid
Guide bar Solid (Stihl Duromatic)
High quality laser cut solid guide bar. Milled groove for the chain. Stable wide fastening and strong hardening. Without top pulley. The guide bar itself is made of extremely strong solid steel.
The tip of the guide bar, which is subjected to the greatest stress, is protected by a hard metal coating. A popular guide bar with our chain sawmill customers.
-
Reinforced guide bar tip: With an extra reinforced guide bar tip/bar nose, this is a reliable sword that many customers choose.
-
Operating time: Long operating time. We estimate that this guide bar will last about twice as long as a Standard model bar under normal circumstances.
-
Care: We recommend that you get into the habit of checking the bar when you change the chain. You can read more in the handbook “The Handbook for Your Guide Bar & Chain,” which is available for free download on our website.
-
Features: Guide bar made of strong solid steel. The tip of the guide bar, which is subjected to great stress, is protected by a coating of carbide.
| Supply: | |
|---|---|
| Guide bar Solid is available in the following lengths for Stihl MS362/MS391/MS660/MS661 & Logosol electric saws ES5 and ES8: | |
| Guide bar Solid 40 cm/16” | 3003-000-8613 |
| Ripping chain suitable for | 3614-000-00602 |
| Guide bar Solid 50 cm/20” | 3003-000-8621 |
| Ripping chain suitable for | 3614-000-0072 |
| Guide bar Solid 63 cm/25” | 3003-000-5531 |
| Ripping chain suitable for | 3614-000-0084 |
| And for Stihl MS880/MS881 in the following lengths: | |
| Guide bar Solid 63 cm/25” | 3002-000-9231 |
| Ripping chain suitable for | 3653-000-0088 |
| Guide bar Solid 75 cm/30” | 3002-000-8041 |
| Ripping chain suitable for | 3653-000-0100 |
| Guide bar Solid 90 cm/36” | 3002-000-8052 |
| Ripping chain suitable for | 3653-000-0114 |
| Guide bar Solid 120 cm/47” | 3002-000-8064 |
| Ripping chain suitable for | 3653-000-0152 |
Standard
Guide bar Standard (Stihl Rollomatic)
Our cheapest guide bar is still of good quality. The guide bar is made of three composite plates. Lightweight but slightly softer than a solid guide bar. We recommend this for sawing smaller quantities of wood.
-
Uptime: Economical guide bar that does the job. We recommend this for those who saw small amounts of wood.
-
Care: We recommend that you get into the habit of checking the bar when you change the chain. You can read more in the handbook “The Handbook for Your Guide Bar & Chain,” which is available for free download on our website.
-
Characteristics: Made of three composite plates, softer than a solid guide bar. Lower friction in the guide bar tip thanks to the top pulley
| Supply: | |
|---|---|
| Guide bar Solid is available in the following lengths for Stihl MS362/MS391/MS660/MS661 & Logosol electric saws ES5 and ES8: | |
| Guide bar Solid 40 cm/16” | 3003-000-6313 |
| Ripping chain suitable for | 3614-000-0060 |
| Guide bar Solid 63 cm/25” | 3003-000-7831 |
| Ripping chain suitable for | 3614-000-0084 |
| And for Stihl MS880/MS881 in the following lengths: | |
| Guide bar Solid 150 cm/59” | 3002-000-9576 |
| Ripping chain suitable for (0,404") | 3958-000-0173 |
This is how we think when we choose guide bar:
Here’s how we think at Logosol when choosing guide bars for ourselves:
Once you’ve invested in a sawmill, it’s wise to ensure that the cutting equipment is of high quality. A good guide bar has a longer operating time, provides smoother sawing, and provides better results. And you can spend time on the most fun thing there is, sawing really nice construction lumber!
We usually use the Premium Guide Bar when sawing. Both we and the customers who buy this guide bar are extremely happy with it. It is more expensive, but it also lasts longer, and we, therefore, think it is well worth buying.
A good option is Guide Bar Solid, which absolutely does an excellent job. It has a slightly shorter lifespan but is affordable and good.
We also sell the Guide Bar Standard, but this bar is of lower quality and is only recommended for customers who will only be sawing a few logs. It is a simpler laminated guide bar that requires more care for a good result. It’s an economy guide bar but not one we usually recommend for chainsaw mills.
Logosol chains for chain sawmills
We sell Stihl PMX Picco ripping chains that are adapted for sawing on chain sawmills.
Some advantages of the chains we sell:
- They are sharpened at a 10-degree angle instead of the standard 30-degree angle for cutting chains.
- The saw kerf is only 6 mm.
- Stihl’s chains have really good quality and are well proven by both us and our customers.
- The chains have holes in the drive links that allow the oil to be better transported along the bar for less wear.
- The chains are pre-tightened. This means that they do not need to be tightened as often.
- The cutting links are long, which means they can be sharpened many times.
Tips! It is often stated on the bar how many drive links the chain should have.
Sprockets for our saw units
We have selected sprockets that are adapted for our different saw units. Make sure you choose the right sprockets that are adapted to your chain. If you use the sprockets we recommend, you can rest assured that you will get it right.
- For sprockets for other models of saw units, please contact us.
Global
